Ижил төстэй зүйлс: Special Issue of the Manufacturing Engineering Society (MES)
- Special Issue of the Manufacturing Engineering Society (MES)
- Journal of Modern Processes in Manufacturing and Production
- Special Issue of the Manufacturing Engineering Society 2019 (SIMES-2019)
- High Performance and Hybrid Manufacturing Processes
- Modern Grinding Technology and Systems
- Energy Efficiency of Manufacturing Processes and Systems
- Recent Trends in Roughness Measurement and Data Analysis of Machined Surfaces
- Physical Metallurgy of Metals and Alloys (3rd Edition)
- Micro/Nano Manufacturing Processes
- Progress in Powder Based Additive Manufacturing
- Additive Manufacturing (AM) of Metallic Alloys
- Advances in Additive Manufacturing and Their Applications (2nd Edition)
- Advanced Manufacturing Technologies
- Superalloys for Industry Applications
- Machining—Recent Advances, Applications and Challenges
- Additive Manufacturing of Metals
- Physical Metallurgy of Metals and Alloys II
- Additive Manufacturing Research and Applications
- Laser Cladding Coatings
- Anniversary Feature Papers
- Design and Post Processing for Metal Additive Manufacturing
- Special Issue of the Manufacturing Engineering Society 2019 (SIMES-2019)
- Proceedings of the 3rd Conference on Physical Modeling for Virtual Manufacturing Systems and Processes
- Design and Management of Manufacturing Systems
Сэдэв: ultrasonic metal welding
- Сэдэв: temperature distribution
- Сэдэв: strength of the joint in tension
- Сэдэв: heat flux
- Сэдэв: friction
- Сэдэв: plastic deformation
- Сэдэв: thermocouple
- Сэдэв: WEDM
- Сэдэв: deep learning
- Сэдэв: deep neural networks
- Сэдэв: Industry 4.0
- Сэдэв: crash boxes
- Сэдэв: joining by forming
- Сэдэв: resistance spot-welding
- Сэдэв: crashworthiness
- Сэдэв: UNS A92024
- Сэдэв: WC–Co
- Сэдэв: wear mechanism
- Сэдэв: tribology
- Сэдэв: adhesion
- Сэдэв: laser
- Сэдэв: additive manufacturing
- Сэдэв: laser beam machining
- Сэдэв: laser polishing
- Сэдэв: waviness
- Сэдэв: roughness
- Сэдэв: Inconel 718
- Сэдэв: Ti6Al4V alloy
- Сэдэв: chip geometry
- Сэдэв: dry machining
- Сэдэв: parametric models
- Сэдэв: turning
- Сэдэв: UNS A92024-T3
- Сэдэв: corrosion
- Сэдэв: surface integrity
- Сэдэв: Ra
- Сэдэв: residual stress
- Сэдэв: functional performance
- Сэдэв: ultimate tensile strength
- Сэдэв: wear
- Сэдэв: drilling
- Сэдэв: machining
- Сэдэв: dry drilling
- Сэдэв: stack
- Сэдэв: FML
- Сэдэв: CFRP
- Сэдэв: UNS A97075
- Сэдэв: stepped shaft
- Сэдэв: cross wedge rolling
- Сэдэв: plastic flow kinetic theories
- Сэдэв: variable cone angle billets
- Сэдэв: near-net forming
- Сэдэв: gear manufacturing
- Сэдэв: roughness model
- Сэдэв: multitasking machines/multiprocess machines
- Сэдэв: NEXAFS
- Сэдэв: soft X-rays SXR
- Сэдэв: SXR absorption spectroscopy
- Сэдэв: respiratory movement
- Сэдэв: lung tumor
- Сэдэв: radiotherapy
- Сэдэв: arduino
- Сэдэв: cancer treatment
- Сэдэв: linear accelerator
- Сэдэв: ultrasonic molding
- Сэдэв: microchannel
- Сэдэв: thin-wall plate
- Сэдэв: replicability
- Сэдэв: polystyrene
- Сэдэв: medical devices
- Сэдэв: FDM
- Сэдэв: PLA
- Сэдэв: material color
- Сэдэв: pigmentation
- Сэдэв: extrusion temperature
- Сэдэв: humidity
- Сэдэв: micro-manufacturing
- Сэдэв: manufacturing systems
- Сэдэв: production planning
- Сэдэв: polylactide (PLA)
- Сэдэв: acrylonitrile butadiene styrene (ABS)
- Сэдэв: tensile behaviour
- Сэдэв: layer height
- Сэдэв: infill density
- Сэдэв: layer orientation
- Сэдэв: cybernetics
- Сэдэв: system dynamics
- Сэдэв: production management
- Сэдэв: maintenance management
- Сэдэв: Viable System Model
- Сэдэв: automotive industry
- Сэдэв: hybrid components stack
- Сэдэв: titanium
- Сэдэв: magnesium
- Сэдэв: repair and maintenance operations
- Сэдэв: roughness average (Ra)
- Сэдэв: ANOVA
- Сэдэв: in-process measurement
- Сэдэв: geometric accuracy
- Сэдэв: grinding process
- Сэдэв: tapered roller bearings
- Сэдэв: single
- Сэдэв: point
- Сэдэв: incremental
- Сэдэв: forming
- Сэдэв: thermoplastics
- Сэдэв: biocompatible
- Сэдэв: temperature
- Сэдэв: process
- Сэдэв: parameters
- Сэдэв: 3D printing
- Сэдэв: correlation coefficients
- Сэдэв: fused deposition modeling
- Сэдэв: non-parametric tests
- Сэдэв: surface roughness
- Сэдэв: LMD
- Сэдэв: laser metal deposition
- Сэдэв: shielding gas
- Сэдэв: argon
- Сэдэв: helium
- Сэдэв: melt pool temperature
- Сэдэв: synthetic polymer
- Сэдэв: bioprinting
- Сэдэв: multi-material microextrusion
- Сэдэв: bioink
- Сэдэв: Selective Laser Melting
- Сэдэв: thermo fluidic
- Сэдэв: phase change
- Сэдэв: consolidation
- Сэдэв: Arbitrary Lagrangean–Eulerian Method
- Сэдэв: metallic powder
- Сэдэв: basalt fiber reinforced plastic (BFRP)
- Сэдэв: delamination
- Сэдэв: edge trimming
- Сэдэв: tool wear
- Сэдэв: scaffold
- Сэдэв: PCL
- Сэдэв: RepRap
- Сэдэв: fused filament fabrication
- Сэдэв: three-dimensional
- Сэдэв: cell culture
- Сэдэв: design
- Сэдэв: topological optimization
- Сэдэв: cost
- Сэдэв: stock
- Сэдэв: spare parts
- Сэдэв: free-form filament fabrication (FFF)
- Сэдэв: robot-assisted polishing
- Сэдэв: force signal
- Сэдэв: end point detection
- Сэдэв: WAAM
- Сэдэв: GMAW
- Сэдэв: cold metal transfer
- Сэдэв: hardness
- Сэдэв: mechanical properties
- Сэдэв: thermal input
- Сэдэв: microstructure
- Сэдэв: Synchrotron X-rays
- Сэдэв: lithography
- Сэдэв: curved substrate
- Сэдэв: microstructures
- Сэдэв: computed tomography
- Сэдэв: surface extraction
- Сэдэв: Canny algorithm
- Сэдэв: Deriche algorithm
- Сэдэв: carbon fiber reinforced polymer
- Сэдэв: hole quality characteristics
- Сэдэв: geometrical parameters
- Сэдэв: roughness parameters
- Сэдэв: taper
- Сэдэв: heat affected zone
- Сэдэв: product lifecycle management (PLM)
- Сэдэв: manufacturing problem solving (MPS)
- Сэдэв: fault diagnosis
- Сэдэв: smart factory
- Сэдэв: process failure mode and effect analysis (PFMEA)
- Сэдэв: case-based reasoning (CBR)
- Сэдэв: hole making
- Сэдэв: surface texture
- Сэдэв: contact measurement
- Сэдэв: optical measurement
- Сэдэв: delphi prospection
- Сэдэв: education
- Сэдэв: employment
- Сэдэв: feature-based modeling
- Сэдэв: inspection planning
- Сэдэв: dimensional and geometrical specification
- Сэдэв: process specification
- Сэдэв: collaborative and integrated product-process development
- Сэдэв: modeling
- Сэдэв: laser processing
- Сэдэв: simulation
- Сэдэв: pyrometer
- Сэдэв: aluminum
- Сэдэв: brain
- Сэдэв: rapid prototyping
- Сэдэв: atlas
- Сэдэв: rat
- Сэдэв: magnetic resonance imaging
- Сэдэв: educative model
- Сэдэв: scaffolds
- Сэдэв: porosity
- Сэдэв: pore size
- Сэдэв: multiobjective optimization
- Сэдэв: priority dispatching rules
- Сэдэв: simulation optimization
- Сэдэв: job shop scheduling
- Сэдэв: flexible manufacturing systems
- Сэдэв: service-oriented manufacturing systems
- Сэдэв: maintenance
- Сэдэв: aircrat engine repair and overhaul (MRO)
- Сэдэв: incremental forming
- Сэдэв: FEM
- Сэдэв: force prediction
- Сэдэв: numerical model
- Сэдэв: semi-analytical model
- Сэдэв: specific energy
- Сэдэв: welding distortion
- Сэдэв: LSND (low stress no distortion)
- Сэдэв: htTTT
- Сэдэв: model validation
- Сэдэв: Compression-After-Impact testing
- Сэдэв: Compression-After-Impact strength
- Сэдэв: carbon fiber reinforced plastics
- Сэдэв: flat specimen
- Сэдэв: AA7075
- Сэдэв: risk assessment
- Сэдэв: dangerous substance
- Сэдэв: Directive 89/391/EEC
- Сэдэв: Directive 2012/18/EU
- Сэдэв: ISO 45001:2018 standard
- Сэдэв: emerging risk
- Сэдэв: major accident
- Сэдэв: manufacturing
- Сэдэв: occupational accident
- Сэдэв: risk management
- Сэдэв: manufacturing industry
- Сэдэв: bow-tie analysis
- Сэдэв: pallet mover accidents
- Сэдэв: accident analysis
- Сэдэв: safety barriers
- Сэдэв: sheet metal forming
- Сэдэв: flanging
- Сэдэв: hole-flanging
- Сэдэв: incremental sheet forming
- Сэдэв: Single Point Incremental Forming (SPIF)
- Сэдэв: thickness distribution
- Сэдэв: additive manufacturing and 3D printing
- Сэдэв: advances and innovations in manufacturing processes
- Сэдэв: sustainable and green manufacturing
- Сэдэв: manufacturing systems: machines
- Сэдэв: equipment and tooling
- Сэдэв: metrology and quality in manufacturing
- Сэдэв: product lifecycle management (PLM) technologies
- Сэдэв: risks
- Сэдэв: thema EDItEUR::T Technology, Engineering, Agriculture, Industrial processes::TB Technology: g...
- Special Issue of the Manufacturing Engineering Society (MES)
- Special Issue of the Manufacturing Engineering Society (MES)
Сэдэв: finite element analysis
- Сэдэв: temperature distribution
- Сэдэв: strength of the joint in tension
- Сэдэв: heat flux
- Сэдэв: friction
- Сэдэв: plastic deformation
- Сэдэв: thermocouple
- Сэдэв: WEDM
- Сэдэв: deep learning
- Сэдэв: deep neural networks
- Сэдэв: Industry 4.0
- Сэдэв: crash boxes
- Сэдэв: joining by forming
- Сэдэв: resistance spot-welding
- Сэдэв: crashworthiness
- Сэдэв: UNS A92024
- Сэдэв: WC–Co
- Сэдэв: wear mechanism
- Сэдэв: tribology
- Сэдэв: adhesion
- Сэдэв: laser
- Сэдэв: additive manufacturing
- Сэдэв: laser beam machining
- Сэдэв: laser polishing
- Сэдэв: waviness
- Сэдэв: roughness
- Сэдэв: Inconel 718
- Сэдэв: Ti6Al4V alloy
- Сэдэв: chip geometry
- Сэдэв: dry machining
- Сэдэв: parametric models
- Сэдэв: turning
- Сэдэв: UNS A92024-T3
- Сэдэв: corrosion
- Сэдэв: surface integrity
- Сэдэв: Ra
- Сэдэв: residual stress
- Сэдэв: functional performance
- Сэдэв: ultimate tensile strength
- Сэдэв: wear
- Сэдэв: drilling
- Сэдэв: machining
- Сэдэв: dry drilling
- Сэдэв: stack
- Сэдэв: FML
- Сэдэв: CFRP
- Сэдэв: UNS A97075
- Сэдэв: stepped shaft
- Сэдэв: cross wedge rolling
- Сэдэв: plastic flow kinetic theories
- Сэдэв: variable cone angle billets
- Сэдэв: near-net forming
- Сэдэв: gear manufacturing
- Сэдэв: roughness model
- Сэдэв: multitasking machines/multiprocess machines
- Сэдэв: NEXAFS
- Сэдэв: soft X-rays SXR
- Сэдэв: SXR absorption spectroscopy
- Сэдэв: respiratory movement
- Сэдэв: lung tumor
- Сэдэв: radiotherapy
- Сэдэв: arduino
- Сэдэв: cancer treatment
- Сэдэв: linear accelerator
- Сэдэв: ultrasonic molding
- Сэдэв: microchannel
- Сэдэв: thin-wall plate
- Сэдэв: replicability
- Сэдэв: polystyrene
- Сэдэв: medical devices
- Сэдэв: FDM
- Сэдэв: PLA
- Сэдэв: material color
- Сэдэв: pigmentation
- Сэдэв: extrusion temperature
- Сэдэв: humidity
- Сэдэв: micro-manufacturing
- Сэдэв: manufacturing systems
- Сэдэв: production planning
- Сэдэв: polylactide (PLA)
- Сэдэв: acrylonitrile butadiene styrene (ABS)
- Сэдэв: tensile behaviour
- Сэдэв: layer height
- Сэдэв: infill density
- Сэдэв: layer orientation
- Сэдэв: cybernetics
- Сэдэв: system dynamics
- Сэдэв: production management
- Сэдэв: maintenance management
- Сэдэв: Viable System Model
- Сэдэв: automotive industry
- Сэдэв: hybrid components stack
- Сэдэв: titanium
- Сэдэв: magnesium
- Сэдэв: repair and maintenance operations
- Сэдэв: roughness average (Ra)
- Сэдэв: ANOVA
- Сэдэв: in-process measurement
- Сэдэв: geometric accuracy
- Сэдэв: grinding process
- Сэдэв: tapered roller bearings
- Сэдэв: single
- Сэдэв: point
- Сэдэв: incremental
- Сэдэв: forming
- Сэдэв: thermoplastics
- Сэдэв: biocompatible
- Сэдэв: temperature
- Сэдэв: process
- Сэдэв: parameters
- Сэдэв: 3D printing
- Сэдэв: correlation coefficients
- Сэдэв: fused deposition modeling
- Сэдэв: non-parametric tests
- Сэдэв: surface roughness
- Сэдэв: LMD
- Сэдэв: laser metal deposition
- Сэдэв: shielding gas
- Сэдэв: argon
- Сэдэв: helium
- Сэдэв: melt pool temperature
- Сэдэв: synthetic polymer
- Сэдэв: bioprinting
- Сэдэв: multi-material microextrusion
- Сэдэв: bioink
- Сэдэв: Selective Laser Melting
- Сэдэв: thermo fluidic
- Сэдэв: phase change
- Сэдэв: consolidation
- Сэдэв: Arbitrary Lagrangean–Eulerian Method
- Сэдэв: metallic powder
- Сэдэв: basalt fiber reinforced plastic (BFRP)
- Сэдэв: delamination
- Сэдэв: edge trimming
- Сэдэв: tool wear
- Сэдэв: scaffold
- Сэдэв: PCL
- Сэдэв: RepRap
- Сэдэв: fused filament fabrication
- Сэдэв: three-dimensional
- Сэдэв: cell culture
- Сэдэв: design
- Сэдэв: topological optimization
- Сэдэв: cost
- Сэдэв: stock
- Сэдэв: spare parts
- Сэдэв: free-form filament fabrication (FFF)
- Сэдэв: robot-assisted polishing
- Сэдэв: force signal
- Сэдэв: end point detection
- Сэдэв: WAAM
- Сэдэв: GMAW
- Сэдэв: cold metal transfer
- Сэдэв: hardness
- Сэдэв: mechanical properties
- Сэдэв: thermal input
- Сэдэв: microstructure
- Сэдэв: Synchrotron X-rays
- Сэдэв: lithography
- Сэдэв: curved substrate
- Сэдэв: microstructures
- Сэдэв: computed tomography
- Сэдэв: surface extraction
- Сэдэв: Canny algorithm
- Сэдэв: Deriche algorithm
- Сэдэв: carbon fiber reinforced polymer
- Сэдэв: hole quality characteristics
- Сэдэв: geometrical parameters
- Сэдэв: roughness parameters
- Сэдэв: taper
- Сэдэв: heat affected zone
- Сэдэв: product lifecycle management (PLM)
- Сэдэв: manufacturing problem solving (MPS)
- Сэдэв: fault diagnosis
- Сэдэв: smart factory
- Сэдэв: process failure mode and effect analysis (PFMEA)
- Сэдэв: case-based reasoning (CBR)
- Сэдэв: hole making
- Сэдэв: surface texture
- Сэдэв: contact measurement
- Сэдэв: optical measurement
- Сэдэв: delphi prospection
- Сэдэв: education
- Сэдэв: employment
- Сэдэв: feature-based modeling
- Сэдэв: inspection planning
- Сэдэв: dimensional and geometrical specification
- Сэдэв: process specification
- Сэдэв: collaborative and integrated product-process development
- Сэдэв: modeling
- Сэдэв: laser processing
- Сэдэв: simulation
- Сэдэв: pyrometer
- Сэдэв: aluminum
- Сэдэв: brain
- Сэдэв: rapid prototyping
- Сэдэв: atlas
- Сэдэв: rat
- Сэдэв: magnetic resonance imaging
- Сэдэв: educative model
- Сэдэв: scaffolds
- Сэдэв: porosity
- Сэдэв: pore size
- Сэдэв: multiobjective optimization
- Сэдэв: priority dispatching rules
- Сэдэв: simulation optimization
- Сэдэв: job shop scheduling
- Сэдэв: flexible manufacturing systems
- Сэдэв: service-oriented manufacturing systems
- Сэдэв: maintenance
- Сэдэв: aircrat engine repair and overhaul (MRO)
- Сэдэв: incremental forming
- Сэдэв: FEM
- Сэдэв: force prediction
- Сэдэв: numerical model
- Сэдэв: semi-analytical model
- Сэдэв: specific energy
- Сэдэв: welding distortion
- Сэдэв: LSND (low stress no distortion)
- Сэдэв: htTTT
- Сэдэв: model validation
- Сэдэв: Compression-After-Impact testing
- Сэдэв: Compression-After-Impact strength
- Сэдэв: carbon fiber reinforced plastics
- Сэдэв: flat specimen
- Сэдэв: AA7075
- Сэдэв: risk assessment
- Сэдэв: dangerous substance
- Сэдэв: Directive 89/391/EEC
- Сэдэв: Directive 2012/18/EU
- Сэдэв: ISO 45001:2018 standard
- Сэдэв: emerging risk
- Сэдэв: major accident
- Сэдэв: manufacturing
- Сэдэв: occupational accident
- Сэдэв: risk management
- Сэдэв: manufacturing industry
- Сэдэв: bow-tie analysis
- Сэдэв: pallet mover accidents
- Сэдэв: accident analysis
- Сэдэв: safety barriers
- Сэдэв: sheet metal forming
- Сэдэв: flanging
- Сэдэв: hole-flanging
- Сэдэв: incremental sheet forming
- Сэдэв: Single Point Incremental Forming (SPIF)
- Сэдэв: thickness distribution
- Сэдэв: additive manufacturing and 3D printing
- Сэдэв: advances and innovations in manufacturing processes
- Сэдэв: sustainable and green manufacturing
- Сэдэв: manufacturing systems: machines
- Сэдэв: equipment and tooling
- Сэдэв: metrology and quality in manufacturing
- Сэдэв: product lifecycle management (PLM) technologies
- Сэдэв: risks
- Сэдэв: thema EDItEUR::T Technology, Engineering, Agriculture, Industrial processes::TB Technology: g...
- Design and Application of Additive Manufacturing
- Testing of Materials and Elements in Civil Engineering (2nd Edition)
- Tube and Sheet Metal Forming Processes and Applications
- Applications of Finite Element Modeling for Mechanical and Mechatronic Systems
- Performance and Safety Enhancement Strategies in Vehicle Dynamics and Ground Contact
- Modeling and Simulation in Engineering, 2nd Edition
- Polymers and Their Application in 3D Printing
- Advanced Robots
- Advances in Dam Engineering
- Advances in CAD/CAM/CAE Technologies
- Advances in Ultra-Precision Machining Technology and Applications
- Damage and Failure Analysis of Polymer-Based Composites
- Polymeric Materials and Their Application in 3D Printing
- Computational Methods for Fracture
- Ocean and Hydropower
- Applied Mathematics and Computational Physics
- Performance of Induction Machines
- Flexible Micromanipulators and Micromanipulation
- Experimental Testing and Constitutive Modelling of Pavement Materials
- Design, Fabrication and Performance of Wind Turbines 2020
- Engineering Properties of Marine Soils and Offshore Foundations
- Discontinuous Fiber Composites, Volume II
- Fatigue and Fracture Behaviour of Additively Manufactured Mechanical Components
- Dental Implant Materials 2019