Testing of Materials and Elements in Civil Engineering (2nd Edition)

This reprint was proposed and organized as a means to present recent developments in the field of testing of materials and elements in civil engineering. For this reason, the articles highlighted in this editorial relate to different aspects of this topic, from building materials to building structu...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Format:	Online
Sprache:	Englisch
Veröffentlicht:	MDPI - Multidisciplinary Digital Publishing Institute 2023
Schlagworte:	timber structures estimating mechanical parameters small clear specimens non-destructive tests semi-destructive tests resistance drilling ultrasonic wave stress wave visual grading concrete NDT finite element method experiment automated inspection frequency domain validation sulfate attack physical and mechanical properties damage model microstructure external thermal insulation systems mechanical properties of bonds polyurethane adhesive timber frame building bond strength shear properties residual magnetic field Barkhausen noise LCR circuits plastic deformation austenitic steel steel fibre-reinforced concrete steel fibres waste sand properties reinforced beam shear cracking shear capacity non-destructive testing damage detection vibrations modal analysis continuous wavelet transform concrete beam strengthening adhesive joint debonding S355 steel uniaxial tensile test strength properties true stress-strain relationships confining pressure expansive clay fiber flexible wall permeameter hydraulic conductivity lime rigid wall permeameter concrete corrosion concrete protection steel corrosion concrete durability coating materials masonry structures autoclaved aerated concrete masonry units (AAC) compressive strength minor-destructive (MDT) techniques non-destructive (NDT) techniques ultrasonic testing acoustoelastic effect (AE) hydrostatic stresses modeling DIC technique ready-mixed concrete construction architecture material inter-laboratory comparisons (ILC) proficiency testing (PT) concrete quality assessment fracture mechanics ductile fracture material microstructure void growth FEM model material testing geodesic dome seismic response dynamic analysis seismic analysis high temperature fire temperature residual strength heat accumulation factor variational asymptotic method reduced-order plate model orthogrid-stiffened panel free-vibration analysis global buckling steel plates ultrasonic tomography base material rock post-installed anchors adhesive anchor mechanical anchor load-bearing capacity GSI RMR rebound value rebound hammer semi-flexible pavement fatigue resistance cracking mechanism fatigue prediction fracture surface cement–cellulose composites ventilated façade acoustic emission method frequencies of acoustic emission signals geosynthetic design pullout resistance effective length reinforced earth clay bricks cement lime mortar infill masonry wall destructive force self-stressed anti-washout concrete segment assembly undrained strengthening axial compression test mechanical properties CFRP grid PCM interface mechanical model pull-out test finite element analysis external walls thermal measurements R-value thermal resistance temperature-based method heat flow meter method infrared thermography method 3D textile composite equivalent model buckling analysis interlaboratory comparison (ILC) risk analysis measurements uncertainty (MU) ceramic tiles adhesive (CTA) assessment and verification of constancy of performance (AVCP) construction product market surveillance artificial weathering testing in civil engineering construction profiles natural fibre-reinforced polymer composites building performance assessment microstructure analysis stairs masonry clay brick arch vault management quality light detection and ranging (LiDAR) TLS low-temperature construction additive preparation method volumetric properties modification mechanism mixture performance bio-rejuvenated additive 100% rejuvenation reclaimed asphalt pavement regeneration mechanism pavement performance macro-strain mode medium- and small-span bridges wavelet transform cross-correlation function hygrothermal simulation capillary active internal insulation mould risk moisture effects subgrade static load test deformation modulus reliability fine-grain concrete bond industrial computed tomography numerical simulation xCT rectangular profile torsional stiffness stiffness increase research guided waves longitudinal wave discrete element method numerical modelling dispersion curves recycled aggregate concrete sustainable aggregate flexural strength gradient boosting random forest ventilated facades large-scale model fibre cement boards fire exposure Bayesian approach prestressing force saw-cut method assessment pre-tensioned members waste from enrichment of water-soluble ores artificially supported mining method backfill activation nanomodifier astralene ultimate compressive strength cement air-entraining admixture plasticizing porosity air-content strength freeze-thawing resistance storage systems looseness stiffness beam-end connection bending gap clearance plastic viscosity yield stress machine learning volcanic soil mechanical property strength index particle crushing road engineering pavement fatigue modules FEM light weight deflectometer solid fired brick defects in the internal structure resonant pulse method material durability drying of soil microwave heating soil structure computed microtomography water content buckling stability civil engineering slender bars columns numerical analysis variable cross-section waste glass recycling construction materials sustainable concrete steel fiber building material fibers mortar hybrid artificial neural networks fibre-cement boards acoustic emission SEM steel fibers steel fiber-reinforced concrete backfill mining loading rate cumulative ringing count damage constitutive model CFRP bond–slip law RC slab retrofit strengthen self-compacting concrete prediction models FRP continuous RC slab optimal design asphalt aging material property climate condition pavement structure field rut depth precast concrete products quality control OC curve AOQ curve shear wave velocity bender elements triaxial testing micromechanics thema EDItEUR::T Technology, Engineering, Agriculture, Industrial processes::TB Technology: general issues thema EDItEUR::T Technology, Engineering, Agriculture, Industrial processes::TB Technology: general issues::TBX History of engineering and technology thema EDItEUR::T Technology, Engineering, Agriculture, Industrial processes::TN Civil engineering, surveying and building::TNK Building construction and materials::TNKX Conservation of buildings and building materials
Online-Zugang:	ONIX_20230808_9783036578903_17
Tags:	Tag hinzufügen Keine Tags, Fügen Sie das erste Tag hinzu!

Beschreibung
Zusammenfassung:	This reprint was proposed and organized as a means to present recent developments in the field of testing of materials and elements in civil engineering. For this reason, the articles highlighted in this editorial relate to different aspects of this topic, from building materials to building structures. The current trend in the development of materials testing in civil engineering is mainly concerned with the detection of flaws and defects in elements and structures using destructive, semidestructive, and nondestructive testing.

Testing of Materials and Elements in Civil Engineering (2nd Edition)

Ähnliche Einträge