Metal Plasticity and Fatigue at High Temperature
In several industrial fields (such as automotive, steelmaking, aerospace, and fire protection systems) metals need to withstand a combination of cyclic loadings and high temperatures. In this condition, they usually exhibit an amount—more or less pronounced—of plastic deformation, often accompanied...
Bewaard in:
| Hoofdauteurs: | , , |
|---|---|
| Formaat: | Online |
| Taal: | Engels |
| Gepubliceerd in: |
MDPI - Multidisciplinary Digital Publishing Institute
2021
|
| Onderwerpen: | |
| Online toegang: | 46090 |
| Tags: |
Geen labels, Wees de eerste die dit record labelt!
|
| _version_ | 1869530632908963840 |
|---|---|
| author | Srnec Novak, Jelena Moro, Luciano Benasciutti, Denis |
| author_browse | Benasciutti, Denis Moro, Luciano Srnec Novak, Jelena |
| author_facet | Srnec Novak, Jelena Moro, Luciano Benasciutti, Denis |
| author_sort | Srnec Novak, Jelena |
| collection | Directory of Open Access Books |
| description | In several industrial fields (such as automotive, steelmaking, aerospace, and fire protection systems) metals need to withstand a combination of cyclic loadings and high temperatures. In this condition, they usually exhibit an amount—more or less pronounced—of plastic deformation, often accompanied by creep or stress-relaxation phenomena. Plastic deformation under the action of cyclic loadings may cause fatigue cracks to appear, eventually leading to failures after a few cycles. In estimating the material strength under such loading conditions, the high-temperature material behavior needs to be considered against cyclic loading and creep, the experimental strength to isothermal/non-isothermal cyclic loadings and, not least of all, the choice and experimental calibration of numerical material models and the selection of the most comprehensive design approach. This book is a series of recent scientific contributions addressing several topics in the field of experimental characterization and physical-based modeling of material behavior and design methods against high-temperature loadings, with emphasis on the correlation between microstructure and strength. Several material types are considered, from stainless steel, aluminum alloys, Ni-based superalloys, spheroidal graphite iron, and copper alloys. The quality of scientific contributions in this book can assist scholars and scientists with their research in the field of metal plasticity, creep, and low-cycle fatigue. |
| format | Online |
| id | doab-20.500.12854ir-53250 |
| institution | Directory of Open Access Books |
| language | eng |
| publishDate | 2021 |
| publishDateRange | 2021 |
| publishDateSort | 2021 |
| publisher | MDPI - Multidisciplinary Digital Publishing Institute |
| publisherStr | MDPI - Multidisciplinary Digital Publishing Institute |
| record_format | ojs |
| spelling | doab-20.500.12854ir-532502024-04-11T15:10:38Z Metal Plasticity and Fatigue at High Temperature Srnec Novak, Jelena Moro, Luciano Benasciutti, Denis TA1-2040 T1-995 aluminum cast partial constraint n/a fatigue criterion thermo-mechanical fatigue stress relaxation aging behavior stainless steel constitutive models environmentally-assisted cracking initial stress levels slip system-based shear stresses thermomechanical fatigue activation volume engineering design pore distribution experimental set-ups tensile tests elevated temperature creep economy LCF fatigue strength hardening/softening hardness pore accumulation defects kinematic model Sanicro 25 probabilistic design AA7150-T7751 strain rate crack growth models bcc probabilistic Schmid factors isotropic model crack-tip cyclic plasticity anisotropy creep fatigue X-ray micro computer tomography temperature transient effects aluminum-silicon cylinder head spheroidal cast iron Probabilistic modeling pre-strain crack-tip blunting and sharpening high temperature steels lost foam thermal–mechanical fatigue cyclic plasticity flow stress Ni-base superalloy pure fatigue René80 polycrystalline FEA constitutive modelling thema EDItEUR::T Technology, Engineering, Agriculture, Industrial processes::TB Technology: general issues::TBX History of engineering and technology In several industrial fields (such as automotive, steelmaking, aerospace, and fire protection systems) metals need to withstand a combination of cyclic loadings and high temperatures. In this condition, they usually exhibit an amount—more or less pronounced—of plastic deformation, often accompanied by creep or stress-relaxation phenomena. Plastic deformation under the action of cyclic loadings may cause fatigue cracks to appear, eventually leading to failures after a few cycles. In estimating the material strength under such loading conditions, the high-temperature material behavior needs to be considered against cyclic loading and creep, the experimental strength to isothermal/non-isothermal cyclic loadings and, not least of all, the choice and experimental calibration of numerical material models and the selection of the most comprehensive design approach. This book is a series of recent scientific contributions addressing several topics in the field of experimental characterization and physical-based modeling of material behavior and design methods against high-temperature loadings, with emphasis on the correlation between microstructure and strength. Several material types are considered, from stainless steel, aluminum alloys, Ni-based superalloys, spheroidal graphite iron, and copper alloys. The quality of scientific contributions in this book can assist scholars and scientists with their research in the field of metal plasticity, creep, and low-cycle fatigue. 2021-02-11T19:22:37Z 2021-02-11T19:22:37Z 2020-06-09 16:38:57 2020 book 46090 9783039287703 9783039287710 https://directory.doabooks.org/handle/20.500.12854/53250 eng application/octet-stream Attribution-NonCommercial-NoDerivatives 4.0 International https://mdpi.com/books/pdfview/book/2284 MDPI - Multidisciplinary Digital Publishing Institute 10.3390/books978-3-03928-771-0 10.3390/books978-3-03928-771-0 46cabcaa-dd94-4bfe-87b4-55023c1b36d0 9783039287703 9783039287710 220 open access |
| spellingShingle | TA1-2040 T1-995 aluminum cast partial constraint n/a fatigue criterion thermo-mechanical fatigue stress relaxation aging behavior stainless steel constitutive models environmentally-assisted cracking initial stress levels slip system-based shear stresses thermomechanical fatigue activation volume engineering design pore distribution experimental set-ups tensile tests elevated temperature creep economy LCF fatigue strength hardening/softening hardness pore accumulation defects kinematic model Sanicro 25 probabilistic design AA7150-T7751 strain rate crack growth models bcc probabilistic Schmid factors isotropic model crack-tip cyclic plasticity anisotropy creep fatigue X-ray micro computer tomography temperature transient effects aluminum-silicon cylinder head spheroidal cast iron Probabilistic modeling pre-strain crack-tip blunting and sharpening high temperature steels lost foam thermal–mechanical fatigue cyclic plasticity flow stress Ni-base superalloy pure fatigue René80 polycrystalline FEA constitutive modelling thema EDItEUR::T Technology, Engineering, Agriculture, Industrial processes::TB Technology: general issues::TBX History of engineering and technology Srnec Novak, Jelena Moro, Luciano Benasciutti, Denis Metal Plasticity and Fatigue at High Temperature |
| title | Metal Plasticity and Fatigue at High Temperature |
| title_full | Metal Plasticity and Fatigue at High Temperature |
| title_fullStr | Metal Plasticity and Fatigue at High Temperature |
| title_full_unstemmed | Metal Plasticity and Fatigue at High Temperature |
| title_short | Metal Plasticity and Fatigue at High Temperature |
| title_sort | metal plasticity and fatigue at high temperature |
| topic | TA1-2040 T1-995 aluminum cast partial constraint n/a fatigue criterion thermo-mechanical fatigue stress relaxation aging behavior stainless steel constitutive models environmentally-assisted cracking initial stress levels slip system-based shear stresses thermomechanical fatigue activation volume engineering design pore distribution experimental set-ups tensile tests elevated temperature creep economy LCF fatigue strength hardening/softening hardness pore accumulation defects kinematic model Sanicro 25 probabilistic design AA7150-T7751 strain rate crack growth models bcc probabilistic Schmid factors isotropic model crack-tip cyclic plasticity anisotropy creep fatigue X-ray micro computer tomography temperature transient effects aluminum-silicon cylinder head spheroidal cast iron Probabilistic modeling pre-strain crack-tip blunting and sharpening high temperature steels lost foam thermal–mechanical fatigue cyclic plasticity flow stress Ni-base superalloy pure fatigue René80 polycrystalline FEA constitutive modelling thema EDItEUR::T Technology, Engineering, Agriculture, Industrial processes::TB Technology: general issues::TBX History of engineering and technology |
| topic_facet | TA1-2040 T1-995 aluminum cast partial constraint n/a fatigue criterion thermo-mechanical fatigue stress relaxation aging behavior stainless steel constitutive models environmentally-assisted cracking initial stress levels slip system-based shear stresses thermomechanical fatigue activation volume engineering design pore distribution experimental set-ups tensile tests elevated temperature creep economy LCF fatigue strength hardening/softening hardness pore accumulation defects kinematic model Sanicro 25 probabilistic design AA7150-T7751 strain rate crack growth models bcc probabilistic Schmid factors isotropic model crack-tip cyclic plasticity anisotropy creep fatigue X-ray micro computer tomography temperature transient effects aluminum-silicon cylinder head spheroidal cast iron Probabilistic modeling pre-strain crack-tip blunting and sharpening high temperature steels lost foam thermal–mechanical fatigue cyclic plasticity flow stress Ni-base superalloy pure fatigue René80 polycrystalline FEA constitutive modelling thema EDItEUR::T Technology, Engineering, Agriculture, Industrial processes::TB Technology: general issues::TBX History of engineering and technology |
| url | 46090 |
| work_keys_str_mv | AT srnecnovakjelena metalplasticityandfatigueathightemperature AT moroluciano metalplasticityandfatigueathightemperature AT benasciuttidenis metalplasticityandfatigueathightemperature |