Design of Heat Exchangers for Heat Pump Applications
Heat pumps (HPs) allow for providing heat without direct combustion, in both civil and industrial applications. They are very efficient systems that, by exploiting electrical energy, greatly reduce local environmental pollution and CO2 global emissions. The fact that electricity is a partially renew...
Enregistré dans:
| Format: | Online |
|---|---|
| Langue: | anglais |
| Publié: |
MDPI - Multidisciplinary Digital Publishing Institute
2021
|
| Sujets: | |
| Accès en ligne: | ONIX_20210501_9783039435135_1194 |
| Tags: |
Pas de tags, Soyez le premier à ajouter un tag!
|
| _version_ | 1869522830989721600 |
|---|---|
| collection | Directory of Open Access Books |
| description | Heat pumps (HPs) allow for providing heat without direct combustion, in both civil and industrial applications. They are very efficient systems that, by exploiting electrical energy, greatly reduce local environmental pollution and CO2 global emissions. The fact that electricity is a partially renewable resource and because the coefficient of performance (COP) can be as high as four or more, means that HPs can be nearly carbon neutral for a full sustainable future. The proper selection of the heat source and the correct design of the heat exchangers is crucial for attaining high HP efficiencies. Heat exchangers (also in terms of HP control strategies) are hence one of the main elements of HPs, and improving their performance enhances the effectiveness of the whole system. Both the heat transfer and pressure drop have to be taken into account for the correct sizing, especially in the case of mini- and micro-geometries, for which traditional models and correlations can not be applied. New models and measurements are required for best HPs system design, including optimization strategies for energy exploitation, temperature control, and mechanical reliability. Thus, a multidisciplinary approach of the analysis is requested and become the future challenge. |
| format | Online |
| id | doab-20.500.12854ir-69448 |
| institution | Directory of Open Access Books |
| language | eng |
| publishDate | 2021 |
| publishDateRange | 2021 |
| publishDateSort | 2021 |
| publisher | MDPI - Multidisciplinary Digital Publishing Institute |
| publisherStr | MDPI - Multidisciplinary Digital Publishing Institute |
| record_format | ojs |
| spelling | doab-20.500.12854ir-694482024-04-11T15:10:21Z Design of Heat Exchangers for Heat Pump Applications Fossa, Marco Priarone, Antonella adsorption cooling technology chiller heat exchanger waste heat utilization CFD heat pumps EnergyPlus buildings exergy transfer performance nanofluids marine seawater source heat pump graphene nanoparticles ground-to-air heat exchangers GAHE experimental results preheating and precooling for HVAC energy saving for HVAC models for calculating the thermal efficiency of ground-to-air heat exchangers shallow geothermal system dual source heat pump phase change materials numerical simulations tube heat exchanger with plate-fins air-side Nusselt number various heat transfer equations in each tube row CFD modelling empirical heat transfer equation ground coupled heat pumps borehole heat exchangers distributed temperature response test grouting material hydration heat release ground heat exchanger whole-building energy simulation ground source heat pump g-Function thema EDItEUR::T Technology, Engineering, Agriculture, Industrial processes::TB Technology: general issues::TBX History of engineering and technology Heat pumps (HPs) allow for providing heat without direct combustion, in both civil and industrial applications. They are very efficient systems that, by exploiting electrical energy, greatly reduce local environmental pollution and CO2 global emissions. The fact that electricity is a partially renewable resource and because the coefficient of performance (COP) can be as high as four or more, means that HPs can be nearly carbon neutral for a full sustainable future. The proper selection of the heat source and the correct design of the heat exchangers is crucial for attaining high HP efficiencies. Heat exchangers (also in terms of HP control strategies) are hence one of the main elements of HPs, and improving their performance enhances the effectiveness of the whole system. Both the heat transfer and pressure drop have to be taken into account for the correct sizing, especially in the case of mini- and micro-geometries, for which traditional models and correlations can not be applied. New models and measurements are required for best HPs system design, including optimization strategies for energy exploitation, temperature control, and mechanical reliability. Thus, a multidisciplinary approach of the analysis is requested and become the future challenge. 2021-05-01T15:49:53Z 2021-05-01T15:49:53Z 2020 book ONIX_20210501_9783039435135_1194 9783039435135 9783039435142 https://directory.doabooks.org/handle/20.500.12854/69448 eng application/octet-stream Attribution 4.0 International https://mdpi.com/books/pdfview/book/3252 https://mdpi.com/books/pdfview/book/3252 MDPI - Multidisciplinary Digital Publishing Institute 10.3390/books978-3-03943-514-2 10.3390/books978-3-03943-514-2 46cabcaa-dd94-4bfe-87b4-55023c1b36d0 9783039435135 9783039435142 172 Basel, Switzerland open access |
| spellingShingle | adsorption cooling technology chiller heat exchanger waste heat utilization CFD heat pumps EnergyPlus buildings exergy transfer performance nanofluids marine seawater source heat pump graphene nanoparticles ground-to-air heat exchangers GAHE experimental results preheating and precooling for HVAC energy saving for HVAC models for calculating the thermal efficiency of ground-to-air heat exchangers shallow geothermal system dual source heat pump phase change materials numerical simulations tube heat exchanger with plate-fins air-side Nusselt number various heat transfer equations in each tube row CFD modelling empirical heat transfer equation ground coupled heat pumps borehole heat exchangers distributed temperature response test grouting material hydration heat release ground heat exchanger whole-building energy simulation ground source heat pump g-Function thema EDItEUR::T Technology, Engineering, Agriculture, Industrial processes::TB Technology: general issues::TBX History of engineering and technology Design of Heat Exchangers for Heat Pump Applications |
| title | Design of Heat Exchangers for Heat Pump Applications |
| title_full | Design of Heat Exchangers for Heat Pump Applications |
| title_fullStr | Design of Heat Exchangers for Heat Pump Applications |
| title_full_unstemmed | Design of Heat Exchangers for Heat Pump Applications |
| title_short | Design of Heat Exchangers for Heat Pump Applications |
| title_sort | design of heat exchangers for heat pump applications |
| topic | adsorption cooling technology chiller heat exchanger waste heat utilization CFD heat pumps EnergyPlus buildings exergy transfer performance nanofluids marine seawater source heat pump graphene nanoparticles ground-to-air heat exchangers GAHE experimental results preheating and precooling for HVAC energy saving for HVAC models for calculating the thermal efficiency of ground-to-air heat exchangers shallow geothermal system dual source heat pump phase change materials numerical simulations tube heat exchanger with plate-fins air-side Nusselt number various heat transfer equations in each tube row CFD modelling empirical heat transfer equation ground coupled heat pumps borehole heat exchangers distributed temperature response test grouting material hydration heat release ground heat exchanger whole-building energy simulation ground source heat pump g-Function thema EDItEUR::T Technology, Engineering, Agriculture, Industrial processes::TB Technology: general issues::TBX History of engineering and technology |
| topic_facet | adsorption cooling technology chiller heat exchanger waste heat utilization CFD heat pumps EnergyPlus buildings exergy transfer performance nanofluids marine seawater source heat pump graphene nanoparticles ground-to-air heat exchangers GAHE experimental results preheating and precooling for HVAC energy saving for HVAC models for calculating the thermal efficiency of ground-to-air heat exchangers shallow geothermal system dual source heat pump phase change materials numerical simulations tube heat exchanger with plate-fins air-side Nusselt number various heat transfer equations in each tube row CFD modelling empirical heat transfer equation ground coupled heat pumps borehole heat exchangers distributed temperature response test grouting material hydration heat release ground heat exchanger whole-building energy simulation ground source heat pump g-Function thema EDItEUR::T Technology, Engineering, Agriculture, Industrial processes::TB Technology: general issues::TBX History of engineering and technology |
| url | ONIX_20210501_9783039435135_1194 |